Footrope Fixture Parts List

Main Runner Maple 3/4" by 1 1/2" by 18"

Mounting Extrusion Aluminum 1/2" by 3/4" by 18" with 1/8" web ( "U"
channel) (can be a rectangular piece of any material to mount main
runner)

Slide Block Maple 2X 3/4" by 1 1/2" by 2" ( note: 2X = number of pieces)

Clamp Carrier/ Line Guide Block Maple 2X 3/4" by 1 1/2" by 1 3/4"

Tension Key Support Block Maple 2X 7/16" by 1" by 1 1/2"

Lower V Block Maple 2X 3/16" by .236" or 6mm) by 1"

Upper V block Maple 2X .236" or 6mm) by 1/2" by 1"

Tension Key Shaft Walnut 2X 5/16" Diameter by 2 1/4" long rod

Tension Key Handle Walnut 2X 1/4" by 5/16" by 1 5/16"

Hardware

Socket Head Cap Screws Stainless Steel 2X 10-32 by 1"

Flat Head Cap Screws Steel 2X 10-24 by 1" ( coarse thread used due to tapping aluminum extrusion (holds better)

"T" Nuts Black Anodized Aluminum 2X 10-32 by Sherline (can be ordered in a package)

Pan Head Phillips M.S.* Stainless Steel 4X 6-32 by 1" * M.S.= Machine Screws

Pan Head Phillips M.S. Stainless Steel 4X 4-40 by 5/8"

Pan Head Phillips M.S. Stainless Steel 2X 4-40 by 7/8"

Flat Washers Stainless Steel 6X # 4

Hex Nuts Stainless Steel 6X 4-40

Slotted Head ThumbScrews Nylon 4X 6-32 by 3/8" (Knurled Heads)
(I happened to have them) MSC carries them. Not a necessity. (they are used to lock tension keys)

Inserts Any Material such as Walnut, Nylon, etc.4X by 6-32 tap drill diameter. (these are used to
prevent marring the Tension Key Shafts.*